Janitza

Categories

• Power quality analysers (5)
• Power analysers (25)
• Energy analysers (29)
• kWh-meters (9)
• Current transformers (39)
• Differential-current transformer (8)
• Dataloggers (1)
• Portable power analysers (1)
• Measuring cabinets (18)
• Differential current monitoring (2)
• Accessories (5)
• Reactive current compensation (127)
• Software and licences (16)
• Show more

Brands

• Janitza (282)

Maximum earth fault current

• 2100mA (8)

Primary current

• 20 A (1)
• 50 A (5)
• 75 A (4)
• 100 A (7)
• 200 A (1)
• 250 A (3)
• 400 A (1)
• 500 A (1)
• 600 A (2)
• 1000 A (1)
• 1200 A (1)
• 2000 A (1)
• 2500 A (1)
• 4000 A (4)
• 8000 A (12)
• Show more

Integrated meter

Integrated meter

The metering cabinets are equipped with one of the following measuring instruments from Janitza.

• UMG 604-PRO (4)
• UMG 605-PRO (4)
• UMG 509-PRO (4)
• UMG 512-PRO (3)
• UMG 96-PQ-L-LP (2)

Secondary current

• 1A (1)
• 333mV (25)
• 24...28 Vdc (1)
• 30W (1)

For connection to

• Rogotrans inverter ../1A (3)
• UMG 96-PQ-L-LP (22)
• RCM 202 AB (8)
• UMG 96RM-E (8)
• UMG 509 (8)
• UMG 512 (8)
• UMG 20CM (8)
• RCM 201-ROGO (5)
• UMG 800-CT8-LP (17)
• UMG 800 series main module (1)
• Modul 800-CT24 (6)
• UMG 103-CBM (1)
• RMU 301-CBM (1)
• Show more

To be used for:

• UMG 96-PA (1)
• UMG 96RM-P (1)
• UMG 96RM-CBM (1)
• UMG 96RM-EL (1)
• UMG 96-PQ-L (1)
• UMG 96RM-PN (1)
• UMG 96RM-E (1)
• UMG 96-PQ-L-LP (1)
• UMG 96-S2 (1)
• UMG 96RM (1)
• UMG 96RM-M (1)
• Show more

Power supply

• 24 VDC (1)
• 5 VDC (1)
• 90–276 V AC (1)

Type

• 1 phase, direct up to 65A (3)
• 3 fase, stroomtrafo ../1A & ../5A (3)
• Power factor correction (27)
• De-tuned power factor correction (100)
• Current transformer (8)
• Split-core current transformer (25)
• Rogowski coil (13)
• Transducer (1)
• 3x Rogowski flex. stroomtrafo's (10)
• 1 x 4G Modem + antenna (7)
• Base (4)
• 3 phase, direct up to 65A (3)
• Show more

Output

• Status (1)
• 2 OSSD, Status (1)

Class

Class

The class of a current transformer indicates the accuracy of the output current. There are different classes, with class 0.1 offering the highest accuracy and class 5 the lowest.

• Class 0,5 (26)

Communication interface

Communication interface

A communication interface is a physical or software-based connection between two systems or devices, enabling them to communicate and exchange data.

• Ethernet (22)
• RS232 (5)
• RS485 (47)
• Modbus RTU (9)
• USB (7)
• Profibus (10)
• Ethernet TCP/IP (1)
• RJ45 (4)
• JanBus (5)
• 2x Ethernet (LAN) (1)
• Show more

Series

• CT (3)
• CT24-SC (6)
• CT-AC RCM (8)
• CT-BSC (3)
• CT-SC (13)
• Gridvis (16)
• Janitza B21 (3)
• Janitza B23 (3)
• Janitza B24 (3)
• ProData (1)
• RCM 201 (1)
• RCM 202 (1)
• RMU 301-CBM (1)
• Rogowski (14)
• UMG 103-CBM (1)
• UMG 20 CM (1)
• UMG 508 (1)
• UMG 509-PRO (2)
• UMG 511 (1)
• UMG 512-PRO (2)
• UMG 604-PRO (3)
• UMG 605-PRO (2)
• UMG 800 (11)
• UMG 806 (5)
• UMG 96-EL (2)
• UMG 96-PA (4)
• UMG 96-PQ-L (8)
• UMG 96-PQ-L-LP (2)
• UMG 96RM (3)
• UMG 96RM-CBM (2)
• UMG 96RM-E (2)
• UMG 96RM-M (2)
• UMG 96RM-P (2)
• UMG 96RM-PN (2)
• UMG 96-S2 (1)
• Show more

Cable diameter

• 0.9 Ø (1)
• 6.1 Ø (1)
• 9.5 Ø (2)
• 10 Ø (5)
• 12 Ø (4)
• 12.3 Ø (1)
• 16 Ø (1)
• 19.3 Ø (1)
• 23.3 Ø (3)
• 24 Ø (1)
• 35 Ø (1)
• 35.3 Ø (2)
• 70 Ø (1)
• 80 Ø (1)
• 110 Ø (2)
• 120 Ø (2)
• 140 Ø (1)
• 150 Ø (1)
• 175 Ø (1)
• 200 Ø (2)
• 210 Ø (1)
• 290 Ø (2)
• 300 Ø (1)
• 310 Ø (1)
• 390 Ø (2)
• 580 Ø (2)
• Show more

Protection standard

• IP 20 (1)
• IP 50 (1)
• IP 54 (3)
• IP 67 (13)

Rail

• 110 x 149 mm (1)
• 21 x 51 mm (1)
• 80 x 120 mm (1)

Width

• 110 mm (1)
• 125 mm (1)
• 140 mm (1)
• 165 mm (1)
• 200 mm (1)
• 22,5 mm (2)
• 23,5 mm (4)
• 235 mm (1)
• 275 mm (1)
• 290 mm (1)
• 35 mm (1)
• 36 mm (3)
• 37,5 mm (3)
• 400 mm (1)
• 45 mm (1)
• 72 mm (7)
• 81 mm (1)
• 92 mm (1)
• Show more

Sec. lead

Sec. lead

The length of the connected cable.

• 2 m (4)
• 0,25 m (5)
• 5 m (13)

Accuracy class

• Class S (2)
• Class A (2)

Function

• Differential current monitoring (2)

Communication protocol

Communication protocol

A communication protocol is a set of rules and standards used to enable the exchange of data between different devices or systems.

• RS485 (1)
• M-Bus (5)
• Modbus RTU (34)
• Modbus TCP (20)
• Profinet (2)
• Profibus DP (10)
• SNMP (1)
• TCP/IP (1)
• HTTP (1)
• BACnet IP (option) (4)
• Modbus (RTU & ASCII) (3)
• OPC UA (2)
• DHCP (1)
• NTP (1)
• Modbus-TCP (option) (2)
• SNMP (option) (2)
• BACnet IP (optie) (6)
• Show more

Product

• Connection cable (1)
• Software (16)
• Mounting kit (2)
• Power supply (1)
• Display (1)

input

• 100...240 Vac (1)
• 110...300 Vdc (1)

Digital inputs

• 2 (9)
• 3 (16)
• 4 (7)
• 8 (2)
• 15 (1)
• Tariff switching (9)
• 14 (1)
• Show more

Digital outputs

• 1 (3)
• 2 (15)
• 3 (13)
• 4 (2)
• 5 (2)
• 6 (4)
• 2 (+3) (4)
• Show more

Analogue inputs

• 1 (6)
• 2 (temperature / RCM) (4)
• 3 (temperature / RCM) (5)
• 0 - 20 mA (2)
• 0 - 40 mA (2)
• 4 - 20 mA (1)
• Temperature (3)
• Show more

Memory

Memory

Janitza an EMU measuring instruments are equipped with memory, allowing measurement values to be stored in memory for extended periods of time.

• No (7)
• 768kB = 250k values (1)
• 4Mb Flash = 156k values (2)
• 32 MB (1)
• 128 MB (5)
• 256 MB (7)
• 256Mb = 10.000k values (6)
• 4GB RAM (3)
• 4 MB (2)
• 64 MB (11)
• Min (8)
• Max (8)
• kWh (8)
• 8 MB (5)
• Show more

Auxiliary voltage

Auxiliary voltage

Auxiliary voltage is the additional voltage required to supply a device with power for proper operation and measurements.

• None (UMG96 / UMG103) (2)
• 90...277 VAC & 90...250 VDC (1)
• 24...90 VAC & 24...90 VDC (2)
• 24 VDC (1)
• 24...48 VDC (2)
• 90...250 VDC (15)
• 90...277 VAC (15)
• 20...50 VAC (2)
• 20...70 VDC (2)
• 48...110 VAC (2)
• 24...150 VDC (2)
• 50...110 VAC (1)
• 50...155 VDC (1)
• 135...340 VDC (2)
• 95...240 VAC (8)
• 80...300 VDC (4)
• 80...340 VDC (2)
• 24...90 VAC (10)
• 24...90 VDC (10)
• 20...250 VAC (1)
• 20...300 VDC (1)
• 90...265 VAC (1)
• 90...276 VAC (1)
• 90...276 VDC (1)
• 80...270 VAC (2)
• 80...270 VDC (2)
• Show more

User interface

• Colour screen (22)
• Web interface (13)
• LCD screen (23)
• None (1)

Harmonics

Harmonics

A harmonic is a frequency that is an integer multiple of the fundamental frequency. The fundamental frequency is the lowest (natural) frequency that a system exhibits by default. A natural frequency of a system is a frequency that the system can inherently exhibit.

• U/I to 40th order (24)
• U/I to 63th order (9)
• U/I up to 65th order (11)
• U/I to 127/63rd order (2)
• U/I to 31st order (2)
• U/I t/m 15ste orde (1)

Analogue outputs

• 1 (4)
• 0 - 20 mA (7)
• 0 - 40 mA (1)
• 4 - 20 mA (1)

Event registration

• Dips (ms) (10)
• Peaks (10)
• Transients(us) (10)
• Dips(ms), peaks, transients(us) (1)

Reports

• o.a. kWh / voltage quality (6)
• EN50160 (5)
• IEC 61000-2-4 (6)
• kWh (5)

Stage power

• 10 (3)
• 12.5 (2)
• 20 (4)
• 25 (2)
• 40 (2)
• 50 (5)
• 50... (17)
• 20/40 (1)
• 25/25 (1)
• 25/50 (1)
• 50/50 (1)
• 50/50... (9)
• 40303 (1)
• 40456 (2)
• 44105 (2)
• 44109 (2)
• 44114 (2)
• 44474 (2)
• 10/20/20 (3)
• 10/20/30 (4)
• 20/20/40... (3)
• 20/40/40 (1)
• 20/40/40... (1)
• 25/25/25 (1)
• 25/25/50 (4)
• 25/25/50... (14)
• 50/50/50... (1)
• 10/10/20/20 (1)
• 12.5/12.5/25 (1)
• 12.5/12.5/25... (1)
• 12.5/25/37.5 (1)
• 20/20/40/40 (2)
• 25/25/25/25 (1)
• 25/25/50/50 (4)
• 25/50/50/50 (3)
• 50/50/50/50 (2)
• 6.25/12.5/12.5 (2)
• 12.5/12.5/25/25 (2)
• 12.5/12.5/25/50 (4)
• 12.5/12.5/25/50... (8)
• 12.5/25/37.5/50 (1)
• 12.5/25/37.5/50... (1)
• 12.5/12.5/25/25/50... (1)
• 12.5/12.5/25/50/50 (1)
• Show more

kvar

Pulse output

Pulse output

The pulse output is an electrical signal that is generated every time a certain amount of energy is consumed. The signal can be used to remotely monitor and measure energy consumption.

• 2 x (9)

Tariff

• Double tariff (9)

Approval

• MID B + D (9)

Accessories

• 4 rogowski coils (1)
• 5 voltage pickoffs (1)
• 1 voltage measurement set (1)
• 1 cross patch cable (1)
• 2 cables current monitoring (1)

Voltage

• 230 V/400 V (2)